Upgrade 30.5×30.5mm HIFIONRC F722 Pro V2 F7 OSD Bluetooth Flight Controller w/ 5V 10V BEC & 45A BL_32 3-6S 4in1 ESC Stack for DJI Air Unit

$69,99

_______________________________________________

Processing Time : 12 Days

Spread the love
  • Yum

Description

Upgrade 30.5×30.5mm HIFIONRC F722 Pro V2 F7 OSD Bluetooth Flight Controller w/ 5V 10V BEC & 45A BL_32 3-6S 4in1 ESC Stack for DJI Air Unit / Caddx Drone

 

Package Included:

1x F7 V2 Flight Controller

1x 45A BL_32 4in1 ESC

1x Capacitor

1x Connection Cable

2x Power Cable

1x bag of Screws

 

 

Notice: Upgrade F7 Flight Controller to V2 new Version.

Will send new version. 

July 28th, 2020

Diffirence:

1.  IMU: MPU6000 only.

2. Also has DJI HD OSD. ( Only betaflight osd old version)

3. 10V 2.5A BEC Output ( 9V 3A old version)

4. 40x40mm External Dimension (30.5×30.5mm old version)

5. Designed the LED installation position in the four corners

6. has wireless Bluetooth parameter modulation

7. Type-C connection port

 

8. More clean and beautiful borad design & Reduce interference

 

 

__________________________________________________________________________

Specification:
Brand Name: HIFIONRC
Item Name:  F722Pro V2 F7 Flight Controller & 40A BL_32 ESC Stack
 F722Pro V2 F7 OSD Flight Controller

MCU:  STM32F722RGT6 216MHz

 IMU: MPU6000

OSD: Betaflight SPI OSD &  DJI HD OSD (UART6)

UART: UART 1/2/3/4/5/6

BEC Output: 5V 3A & 10V 2.5A ( supports stable power supply for DJI HD and high-power analog graph transmission)

Input Voltage: 3-6S Lipo

Blackbox: 16MB

Firmware: HIFIONRC F7

LED: 4 Ways independent LED Pad, support WS2812 Programable LED

 Dimension: 40x40mm

Mounting Hole: 30.5×30.5mm, M4

Weight: 7g

– Onboard Voltage Sensor

– Support SBUS, CRSF, IBUS, Spektrum 1024/2048, XBUS, SumD & SumH Receiver, Built-in inverter

– Support Support 3.3V Satellite Receiver

 45A BLheli_32 32bits 4In1 ESC

Input Voltage: 3-6S Lipo

Con. Current: 45A

Burst Current: 55A (5S)

MOS Model:  QN3019M6

MCU: STM32F051, 48MHz

Firmware: BLheli_32

-Onboard Current Sensor

– Support DShot300-1200, Proshot1000, Oneshot, Multishot, PWM ( 48MHz)

Mounting Hole: 30.5×30.5mm, M4

Weight: 12g

Features:

– has wireless Bluetooth parameter modulation, and the UART used for bluetooth parameter modulation is UART4_MSP,

The Bluetooth signal is isolated and does not interfere with the receiver and the rest of the equipment

(If we don’t find the bluetooth antenna, don’t worry, we hid it)

– This FC includes a DJI HD cable in default.

If you use DJI HD, this means you don’t need to buy a separate FC and DJI HD cable.

Don’t worry if you’re using a traditional Video TX.

– The flight controller comes with an AT7456 chip, allowing you to still use OSD functionality.

– The STM32F722 MCU has a built-in inverter, so the receiver can be installed in any RX.

Used when opening the corresponding UART serial digital receiver (default is RX2_UART2)

Reviews

There are no reviews yet.

Be the first to review “Upgrade 30.5×30.5mm HIFIONRC F722 Pro V2 F7 OSD Bluetooth Flight Controller w/ 5V 10V BEC & 45A BL_32 3-6S 4in1 ESC Stack for DJI Air Unit”

Your email address will not be published. Required fields are marked *