Sale!
Description
Package Included:
1x 220mm Frame Kit
1x F7 V2 Flight Controller
1x 45A BL_32 4in1 ESC
1x Capacitor
1x Connection Cable
2x Power Cable
1x bag of Screws
___________________________________________
Specification:
Item Name: 220mm Frame Kit & F7 FC 45A ESC Stack Combo
| Steele 5 220mm Frame Kit
|
Model: Steele 5
Item Name: 220mm Wheelbase 5 Inch Frame Kit Wheelbase: 220mm Structure: X type
Material: Carbon Fiber
Arm Plate Thickness: 5mm
Bottom Plate Thickness: 3mm
Upper Plate Thickness: 2mm
Side Plate Thickness: 2mm
Center Plate Thickness: 3mm
Internal Standoff Height: 20mm
Weight: 109g
|
| Bluetooth F7 OSD Flight Controller
|
Brand Name: HIFIONRC Item Name: F722Pro V2 F7 Flight Controller & 40A BL_32 ESC Stack F722Pro V2 F7 OSD Flight Controller MCU: STM32F722RGT6 216MHz IMU: MPU6000 OSD: Betaflight SPI OSD & DJI HD OSD (UART6) UART: UART 1/2/3/4/5/6 BEC Output: 5V 3A & 10V 2.5A ( supports stable power supply for DJI HD and high-power analog graph transmission) Input Voltage: 3-6S Lipo Blackbox: 16MB Firmware: HIFIONRC F7 LED: 4 Ways independent LED Pad, support WS2812 Programable LED Dimension: 40x40mm Mounting Hole: 30.5×30.5mm, M4 Weight: 7g – Onboard Voltage Sensor – Support SBUS, CRSF, IBUS, Spektrum 1024/2048, XBUS, SumD & SumH Receiver, Built-in inverter – Support Support 3.3V Satellite Receiver |
| 45A BLheli_32 32bits 4In1 ESC | Input Voltage: 3-6S Lipo
Con. Current: 45A Burst Current: 55A (5S) MOS Model: QN3019M6 MCU: STM32F051, 48MHz Firmware: BLheli_32 -Onboard Current Sensor – Support DShot300-1200, Proshot1000, Oneshot, Multishot, PWM ( 48MHz) Mounting Hole: 30.5×30.5mm, M4 Weight: 12g |
Features:
– has wireless Bluetooth parameter modulation, and the UART used for bluetooth parameter modulation is UART4_MSP，
The Bluetooth signal is isolated and does not interfere with the receiver and the rest of the equipment
(If we don’t find the bluetooth antenna, don’t worry, we hid it)
– This FC includes a DJI HD cable in default.
If you use DJI HD, this means you don’t need to buy a separate FC and DJI HD cable.
Don’t worry if you’re using a traditional Video TX.
– The flight controller comes with an AT7456 chip, allowing you to still use OSD functionality.
– The STM32F722 MCU has a built-in inverter, so the receiver can be installed in any RX.
Used when opening the corresponding UART serial digital receiver (default is RX2_UART2).
Related products
-
$16,99 – $20,99
Reviews
There are no reviews yet.