SKYSTARS STX225 DIY Version 225mm PNP w/ F405 AIO RGB LED 1200TVL 600mW VTX



Processing Time : 1-3 Days

Spread the love
  • Yum


Package included:
1x STX225 DIY version PNP


Brand name: SKYSTARS
Item name: STX225 DIY version FPV racing drone PNP
Recommended 3 – 4S 1300 – 1500mAh battery (package not included)

Frame kit ● Wheel base: 225mm

● Frame arm thickness: 4mm

● Bottom plate thickness: 2mm

● Side plate thickness: 2mm

●Frame kit material: 3K carbon fiber

2205 2300KV Brushless Motor Motor KV: 2300RPM/V
Idle current (Io/10V): 1.26A
Lipo cell: 3-5S
Weight: 26g
Max continuous current: 25A
Max continuous power: 240W
Max thrust: 700g (4S/5″)
Configu-ration: 12N/14P
Motor resistance (RM): 0.0572 Ω
Stator diameter: 22mm
Stator thickness: 4mm
Motor diameter: 27.55mm
Motor body length: 20mm
Overall shaft length: 34.2mm
Prop adapter shaft: M5
Bolt holes spacing: 16mm
Bolt thread: M3
Propeller: 5inch
35A BLHeli_32  RGB LED ESC Continuous current: 35A
Peak Current: 40A(10S)
Input voltage: 2-5S
BEC: NO bec
Main control chip: STM32F051
Firmware: BLHeli_32 supports 500HZ PWM, Oneshot125, Oneshot42, Multishot, Dshot150/300/600/1200.
 F405AIO Updated. Click For Details

● Inculd barometer.

● Sensor: MPU6000

● Power supply: 5V

● Integrated OSD

5x UARTs
1x Group of  G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x pair I2C1 pads
1x press button for BOOT(DFU) mode
1200TVL CMOS Camera Case size: 19mm*19mm
Weight: 9.5g
Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP)
Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP)
Signal system: PAL/NTSC switchable
Resolution ratio(horizontal center): 1200TVL
Video output: 1.0Vp-p/75Ω
Automatic gain control: yes
White balance: on/off optional
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) – 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: inter-sync
Camera lens: standard 2.3mm
Lens operating voltage: DC12V (wide voltage, measured can work normally at 7.5-13V)
Working current: 70mA (low power consumption)
Working temperature: -20℃~-60℃
Humidity: 0%~98%
   600mw switchable VTX Frequency band: A – E ( 8 channels in each band )

Transmitting power: 600mW

Full video format: NTSC / PAL
Input voltage: 7V – 24V

Transmission distance: more than 0.5km ( 25mW ), more than 1km ( 200mW ), more than 2km ( 600mW )

With output power self-check function
Antenna connector: MMCX

5042 3 Blade Propeller Material: PC
Mounting hole: 5mm
Center thickness: 8mm
Quantity: 2 pairs
Weight: 7.25G a pair
Color: blue, red, yellow, purple, white MIX
Delivery color randomly

Note: Battery is Not Included.


There are no reviews yet.

Be the first to review “SKYSTARS STX225 DIY Version 225mm PNP w/ F405 AIO RGB LED 1200TVL 600mW VTX”

Your email address will not be published. Required fields are marked *