Matek F405-STD BetaFlight STM32F405 Flight Controller

$35,82

Elevate your drone.

– Inbuilt F4 processor for more processing power.

– 32k gyro current monitor.

– Built in OSD inverter.

– Easy firmware flashing.

_______________________________________________________
Processing Time : 1-3 Days
Spread the love
  • Yum

Description

Matek Systems F405-STD BetaFlight STM32F405 Flight Controller 

Looking for the best way to add loads of cool features to your aircraft? The first place you should be looking is at your flight controller. Elevate your drone by getting the generously equipped Matek F4504-STD Betaflight flight controller. It has multiple features to improve your piloting experience. The inbuilt F4 processor has an increased processing power advantage to be able to handle all the new and cool processing intensive features without compromising on flight quality.

With the 32k gyro current monitor you can easily keep track of the amount of current your drone is using at different speeds and throttle ranges. This is important for preventing any damage to your battery. This decked out flight controller also includes a built in OSD inverter for RC multirotor FPV racing drone. And, to add to the convenience of this flight controller, the boot button is positioned on the side of the board so firmware flashing can be done with ease.

Package included:
1x flight control board
2x 0.5mm*16Pin 5cm Flexible Flat Cable
4x M3 Anti-vibration Standoffs

_____________________________________________

Specification (user manual):
Brand: Matek Systems
Item name: Flight Control Board – Matek F405-STD
Size: 36x36mm
Mounting hole: 30.5mm
Weight: 7g

MCU: 168MHz STM32F405RGT6
IMU: 32K ICM20602 gyro/accelerometer (SPI)
Baro: BMP280 (I2C)
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
SoftSerial on TX2, S5 or S6 optional
Camera control on S6 or DAC optional
Smartaudio & Tramp VTX protocol supported
Battery Voltage Sensor: 1:10
Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
LDO 3.3V: Max.300mA
I2C1 SDA & SCL: Yes
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes

 

Additional information

Weight 0.038 kg

Reviews

There are no reviews yet.

Be the first to review “Matek F405-STD BetaFlight STM32F405 Flight Controller”

Your email address will not be published. Required fields are marked *