Holybro PIX32 V5 Pixhawk Flight Controller 32 Bit Arm STM32F765 2MB MS5611 Barometer

$158,11

__________________________________

Processing Time : 1-3 Days

 

Spread the love
  • Yum

Description

HolyBro Pix32 v5 is a new flight controller we have developed on the base of FMUv5scheme, which can be regarded as a variant version of ‘Pixhawk4’.The Pix32 v5 is comprised of a separate flight controller and carrier board which areconnected by a 100pin connector. It is designed for those pilots who need a high power,flexible and customisable flight control system.By using a carrier board designed for the style of model you need you can make sure thatthe physical size, pinouts and power distribution requirements match the model perfectly.Different carrier boards designed for multirotors, fixed wing aircraft, ground based vehiclesor even water based models ensure that you have all the connections you need and noneof the expense and bulk of connectors you don’t. We have made the carrier boardschematics public, you can either make a custom carrier board by yourself or just letHolyBro help you with it.If you’ve tried to use a PixHawk4 but struggled to make it work with your design then thePix32 v5 may be the answer with its ability to fit within a custom carrier board with justwhat you need. As the Pix32 v5 is based on the PX4 and ArduPilot systems you can alsotake advantage of all of the latest peripherals, software and enhancements offered bythose systems for a quick easy setup and flying experience.

Package Included:

1 x PIX32 V5 Flight Controller

______________________________

Technical Specifications :

Main FMU Processor: STM32F765

– 32 Bit Arm ® Cortex®

-M7, 216MHz, 2MBmemory, 512KB RAM

IO Processor: STM32F100

– 32 Bit Arm ® Cortex®

-M3, 24MHz, 8KBSRAM

On-board sensors

– Accel/Gyro: ICM-20689

– Accel/Gyro: BMI055

– Mag: IST8310- Barometer: MS5611

GPS: ublox Neo-M8N GPS/GLONASS receiver;integrated magnetometer IST8310

 

Interfaces

8-16 PWM servo outputs (8 from IO, 8 fromFMU)

3 dedicated PWM/Capture inputs on FMU

Dedicated R/C input for CPPM

Dedicated R/C input for Spektrum / DSM andS.Bus

with analog / PWM RSSI input

Dedicated S.Bus servo output

5 general purpose serial ports

– 2 with full flow control

– 1with separate 1.5A current limit

3 I2C ports

4 SPI buses

– 1 internal high speed SPI sensor bus with 4chip selects and 6 DRDYs

– 1 internal low noise SPI bus dedicated for

– Barometer with 2 chip selects, no DRDYs

– 1 internal SPI bus dedicated for FRAM

– Supports dedicated SPI calibrationEEPROMlocated on sensor module

– 1 external SPI buses• Up to 2 CANBuses for dual CAN with serial E

– Each CANBus has individual silent controlsor ESC RX-MUX control

Analog inputs for voltage / current of 2batteries

2 additional analog inputs

 

Electrical Data

Voltage Ratings:

Power module output: 4.9~5.5V

Max input voltage: 6V

Max current sensing: 120A

USB Power Input: 4.75~5.25V

Servo Rail Input: 0~36V

 

Mechanical Data

Dimensions: 45x45x13.5mm

Weight: 33.0g

 

Environmental Data, Quality & Reliability

Operating temp. -40~85℃

Storage temp. -40~85℃

CE

FCC

RoHS compliant (lead-free)

 

Holybro_PIX32-V5_technical_data_sheet.pdf

Holybro_PIX32-V5_PINOUTS.pdf

Reviews

There are no reviews yet.

Be the first to review “Holybro PIX32 V5 Pixhawk Flight Controller 32 Bit Arm STM32F765 2MB MS5611 Barometer”

Your email address will not be published. Required fields are marked *