Happymodel BeecoreX FR Brushed F4 OSD 1S Flight Controller Built-in 5A Brushed 4IN1 ESC

$39,99

_____________________________________

Processing Time : 19 Days

Available on backorder

Spread the love
  • Yum

Description

Happymodel BeecoreX FR Brushed F4 OSD 1S Flight Controller Built-in 5A Brushed 4IN1 ESC 5.8G 25-100mW VTX SPI Frsky RX for Brushed Tiny Whoop

Introduction: 

The BeecoreX is a ultimate flight controller for Brushed Tinywhoop , it include F4 FC, vtx , ESC, frsky receiver and betaflight OSD.

It makes very easy to build a brushed tinywhoop.

You only need to buy an FPV camera and brushed motors ,frame and propeller and then plug and play ,

No soldering require at all .

_______________

Package Included:

1x Happymodel BeecoreX FR F4 1S Flight Controller

1x Cable with Conenctor

1x Conenction Cable

4x Anti-Vibration Standoff

1x bag of Screws

__________________________________

Specification:

Brand: Happymodel

Item Name: BeecoreX FR F4 1S Flight Controller

Flight Controller  (Frsky SPI RX version) Betaflight Firmware Target: CrazybeeF4FR

MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI Connection)
Board Size: 28.5 * 28.5mm
Power Supply: 1S Battery Input (DC 2.9V-4.35V)
Built-in 5A(each) Brushed 4IN1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX 25mw~100mw Switchable
Built-in SPI Frsky receiver(compatible with Frsky_D/ Frsky_X/ S-   FHSS/ Redpine protocol)
Built-in 5V 1A BEC
Built-in voltage detection

 Onboard Frsky SPI  Receiver Version  SPI BUS receiver Frsky Version

Compatible with Frsky D8/D16 ( D8 is Recommend) , S-FHSS ,   Redpine Protocol
Channels: 8CH
Failsafe Support
No Ground Interference ( Transmitter and receiver 1 m from the   ground): 100m~200m
RSSI Compatible

 Onboard 5.8g VTX  Output Power: 25mw~100mw Switchable
Frequency: 40CH
Input Voltage: 3.3V 5.5V
Current Consumption: 300mA(type)
Frequency: 5.8GHz 5bands 40 channels
With Race Band
Smartaudio Ready
VTX POWER=1 (25mw)
VTX POWER=2(50mw)
VTX POWER=3(100mw)
Recommend to use 50mw.
Recoomend Runcam Nano3 camera , plug and play.

(No Included   Runcam Nano3 Camera)

Notes:

R1(RX1) Pad is used for IBUS/DSM2/DSMX signal input.

IR1(IRX1) Pad is used for SBUS signal input (Already inverted).

R1 and IR1 Cannot be used simultaneously.

Reviews

There are no reviews yet.

Be the first to review “Happymodel BeecoreX FR Brushed F4 OSD 1S Flight Controller Built-in 5A Brushed 4IN1 ESC”

Your email address will not be published. Required fields are marked *