Description
Geprc Mark4 HD GPS 225mm 6S 5 Inch PNP BNF w/ Caddx Vista HD Digital System – Support DJI Air Unit
The GEPRC Mark 4 comes with an ultra light and stylish design with blue propellers. With integrated gps the Mark 4 is able to return to base in case of emergency. This model is equipped with the CADDX Vista HD FPV system and also supports the DJI FPV Air Unit.
Package Included:
1x  MARK4 HD GPS FPV Racing Drone ( 6S Version)
Specification:
Brand Name: Geprc
Model: Mark4 HD GPS
Item Name:Â 225mm F4 OSD 6S 5 Inch FPV Racing Drone
Optional Receiver: Without Receiver/ Frsky XM+ Receiver/ Frsky R-XSR Receiver/ TBS Crossfire Nano Receiver
Weight:Â 392g ( Without Battery)
225mm Frame Kit | MARK4 HD GPS Frame kits(Improved version)
Wheelbase: 225mm Material: 3K Carbon Fiber Arms plate : 5mm Side plate : 2.5mm Top plate : 2.5mm Bottom plate : 2.5mm Protect plate : 2mm Size: 138x176mm |
F4 OSD Flight Controller |
MCU: STM32F405
IMU: MPU6000(SPI)
DJI FPV Air Unit Supported.
BlackBox: 16Mb onboard Flash
Type-C USB interface
OSD: BetaFlight OSD w/ AT7456E chip
Baro: BMP280
BEC Output: 5V,9V BEC
Integrated LC Filter
Firmware target:GEPRCF405
Size: 36x36mm board, φ4mm with Grommets φ3mm
6x UART
|
50A BLheli_32 4In1 Brushless ESC | MCU: STM32FO51K86(32bit 48mHz)
Continuous Current: 50A Peak Current: 55A (5S) Input Voltage: 3-6S Lipo Firmware Version: GEPRC-BL32-4IN1 Telemetry: Supported Current sensor: YES Support DSHOT1200/DSHOT600, PWM, Multishot, OneShot BLHeliSuite download: ( Link) |
GR2306.5 1850KV Brushless Motor
|
Brand Name: Geprc Model:Â GR2306.5 Item Name:Â 2306.5 1850KV 6S Brushless Motor KV: 1850KV
Input Voltage:Â 5-6SÂ Quantity: One PC Version: CW Screw Thread Configuration: 12N14P
Stator Diamter: 23mm
Stator Length: 6.5mm
Shaft Diameter: 5mm
Motor (Dimension: Φ28.2*29.2mm (Dia.*Len))
Idle current(10)@10V: 1.95A
Max Continuous (Power (15S): 1000W
Internal Resistance:38mΩ
Max Current(15S): 49A
Effciency Current:(3-7A)>85%
Rotor: N52H arc magnets
Bearings:JAPAN ISC
Base casing: Al 7075
Wire AWG: 20AWG
Weight(g):31g (not include wire)
|
GEPRC G5x4.3×3 5043 3-Blade Propeller | Item Name: 5×4.3 5043 5 Inch 3-Blade Propeller
Quantity: 2 CW & 2 CCW |
5.8G 600mW VTX | Channel: 48
Power transmission: 0mW(Pit mode) / 25 / 100 / 200 / 600mW Connector type: MMCX Connector Traditional button IRC Tramp protocol |
CADDX Vista HD Camera | Brand Name: Caddx Item Name: Vista Kit Operating Frequency: 5.725-5.850GHz
Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm
Min. Latency (end-to-end): Low Latency Mode(720p 120fps): 21-28ms,
High Quality Mode(720p 60fps): 30-40ms
Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km
I/O Interface: USB-C,IPEX,3-in-1 Port,microSD card slot
Supported Flight Control System: F3,F4,F7
Operating Temperature Range: 32° to 104° F (0℃ ~40℃) Input Power: 7.4-26.4V
Camera Specifications:
Sensor: 1/3.2” CMOS
Effective Pixels: 4M
Lens: 2.1mm,f/2.1
Shutter: Rolling shutter
ISO: 100-25600
FOV: 150° (D);122° (H);93° (V)
|
Recommend Lipo Battery (NOT Included) | 6SÂ 1050-1300mAh Lipo Battery |
Features:
– Ultra-lightweight design
– Integrated GPS, able to return to base in emergency
– CADDX Vista HD FPV(Low Latency Mode (720p 120fps): 21-28ms)
– Full 3K Carbon Fiber
– Black Box: 8Mb onboard flash memory
– GR2306.5 1850KV 6S Motors
– Full Soft Mounted FC System: Provides a clean operating environment for gyroscope.
– Exquisite Assembly Process: Eliminate any potential installation problems.
Additional information
Receiver | FrSky R-XSR Receiver, Frsky XM+ Receiver, TBS Crossfire Nano RX, Without Receiver |
---|
Reviews
There are no reviews yet.