Betafpv Beta95X V2 HD Digital VTX 95mm 4S Whoop PNP BNF w/ Caddx Nebula Nano HD System

$289,99$319,99

_____________________________________________________

3-10 Days Shipping Time ( FREE SHIPPING )

Clear

Description

Betafpv Beta95X V2 HD Digital VTX 95mm F4 OSD AIO 16A ESC 4S Whoop PNP BNF w/ Caddx Nebula Nano HD System

Introduction:

The pusher whoop drone with HD digital VTX you have been waiting for!

Especially combined with Insta360 GO, you can achieve all FPV freestyle tricks easily like diving but still keep your footage impossibly smooth.

Featuring the highly popular inverted drone frame, the center of gravity is right in the middle of the drone, pilots can control the drone better in flight.

What’s more, Beta95X V2(HD Digital VTX) equipped with Nebula Nano Kit, perfectly supports the DJI FPV goggles.

BTW, we provide the camera mount for the Customized Naked Camera, so you can replace it if you need it.

Package Included:

1x Beta95X Whoop Quadcopter(HD Digital VTX)
1x Insta360 GO Camera Mount
1x Naked Camera Mount
1x Case for Naked Camera V2
1x BEC Board
2x D63 3-blades Propellers CW

2x D63 3-blades Propellers CCW

1x Screw Pack
1x TypeC Connector

________________________________________________

Specification:

Brand Name: Betafpv

Model: Beta95X V2 ( HD digital VTX )

Item Name: 95mm F4 4S FPV Racing Drone

Wheelbase: 95mm

Weight: 113g (without battery)

Flight Time:  about 3.5mins ( take example as 4s 450mah lipo)

Betafpv Beta95X V2 95mm Frame KitWheelbase: 95mm

Color: Black

Material: Plastic & Carbon Fiber

Wheelbase: 95mm

Weight: 13.3g

Betafpv F4 Flight Controller AIO 16A BL_32 ESCCPU: STM32F405 (Overclock to 240MHz)

Six-Axis: MPU6000

Size: 26mm x 26mm, whoop mounting pattern

Firmware version: BETAFPVF405 (BEFH)

OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)

RX3 and TX3 are with auto inverter, supporting all RX including TBS Micro RX

TX01 and RX01 ports are available for Frsky F-Port, DSM2/DSMX

Buzzer solder pads

Support programable LED like WS2812 etc

Weight: 4.2g

Support BLHELI_32

Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200

Input voltage: 3-4S lipo

Con. Current: 16A

Burst Current: 19A

Firmware Target: BETAFPV-16A-32bit

MCU: STM32F051K66

Motor Connectors: 1.25mm header pins connector

Weight: 4.4g (7.7g with XT30 cable)

Betafpv 1106 4500KV Motor
Height: 14mm
Weight: 6.6g
Shaft: φ1.5mm
Motor Mount Holes: M2EQS on Dia 5.0mm
KV (rpm/V): 4500KV
Plug and cables: Micro JST-1.25 3-pin connector
Gemfan D63 3-Blade PropellerItem: D63 3-Blade Propellers

Blades: 3

Color: Obsidian Black

Weight: 1.4g

Material: PC

Prop Disk Diameter: 63.5mm

Center Thickness: 4.9mm

Shaft Hole: 1.5mm

Caddx Nebula Nano HD System
Dimensions:
Vista Kit: 30x29x13mm
Camera: 14x14x21mm
Coaxial Cable:80mm/120mm
Operating Frequency: 5.725-5.850GHz
Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm
Min. Latency (end-to-end):720p 60fps: 32ms
Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km
I/O Interface: USB-C,IPEX,3-in-1 Port
Supported Flight Control System: F3,F4,F7
Operating Temperature Range: 32° to 104° F (0℃ ~40℃)
Input Power: 7.4-26.4V
Power output: 25mW/200mW/500mW/700mW
Hardware included:Vista/Nebula nano/Coaxial cable/Antenna
Camera:Sensor: 1/3”CMOS
              Lens: 2.1mm,f/2.1
              Shutter: Rolling shutter
              FOV: 150°[D],122°[H],93°[V]
HD Camera MountHD Camera Mount Degree: 15° (Provide the STL file of 25° camera mount)
Air 5.8GHz Digital VTX Antenna
Connector: IPEX
Polarizability: LHCP
Gain: 2.2Dbi
Color: Blue
Weight: 1.1g (1 pc)
Dimensions: 10.3mm*50mm
Center Frequency: 5.8GHz
Bandwidth: 500 MHz (5.5 – 6.0GHz)
Cable:RG1.37
Recommend Lipo Battery ( NOT Included)Recommend 4S 450mAh Lipo Battery XT30 Plug ( NOT Included)

Features:

1. The first joint cinewhoop with Insta360 Go, create a different FPV experience with you. ( This Camera Not Included)

2. Camera and battery are placed on the top platform. The center of gravity is right in the middle of the drone, makes the drone more maneuverable to achieve all FPV freestyle tricks such as diving.

3. Stable camera, clear footage. Using rubber dumpers to further eliminate the shake of the camera, makes the camera more stable on the flight, which ensures pilots can capture all the beautiful moments of flight with stabilized and clear video

4. With 95mm wheelbase, 1106 motors and F405 FC16A BLHeli_32 ESC, Beta95X V2(HD Digital VTX) is powerful enough. Pilots can fly any freestyle tricks such as DIVE.

5. Equipped with the nebula Nano HD System, perfectly supports the DJI HD system. This lightweight kit also provides a stable FPV picture and long transmission distance, greatly bring you a unique flight experience.

6. Customized Gemfan D63 propeller for Beta95X V2, it is more durable than the other propellers, offers pilots a high-efficiency flight experience.

Additional information

Receiver

, , ,

Reviews

There are no reviews yet.

Be the first to review “Betafpv Beta95X V2 HD Digital VTX 95mm 4S Whoop PNP BNF w/ Caddx Nebula Nano HD System”

Your email address will not be published. Required fields are marked *