18.5g Happymodel Moblite6 65mm Whoop BNF



Spread the love
  • Yum


18.5g Happymodel Moblite6 65mm 1S Diamond F4 AIO 5A BB2 ESC Receiver 25/200mW VTX Whoop – BNF

Package Included:

1x Happymodel Moblite6 65mm Whoop RC FPV Racing Drone
Option1: 1 x DiamondF4 FR built-in SPI Frsky Receiver
Option2: 1 x DiamondF4 FS built-in SPI Flysky Receiver
4x EX0802 KV19000 Unibell Brushless Motor
1x Gemfan 1219 31mm Propeller (4cw+4ccw)
1x Runcam Nano 3 FPV Camera
1x Built-in 5.8Ghz 40CH 25mw-200mw VTX
2x 1S 300mAh Lipo Battery
1x Propeller Disassemble Tool
1x Screwdriver
1x Happymodel Carry Case



Brand: Happymodel

Item Name:  Moblite6 1S 65mm ultra light brushless whoop
Wheelbase: 65mm
Size: 80x80x25mm
Weight: 18.5g (without battery)
Weight: 26g (with Original 1S 300mAh Lipo battery )

 Motor  Model: EX 0802 19000KV ( Unibell Version)

Configuration: 9N12P
Stator Diameter: 8mm
Stator Length: 2mm
Shaft Diameter:ő¶1mm
Motor Dimension(Dia.*Len): ő¶10.5mm*14.9mm
Weight(g): 1.7g
No.of Cells(Lipo): 1S only

 Flight Controller  (Frsky SPI RX Version) DiamondF4 FR FC Firmware   Target: CrazybeeF4FR

MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000 (SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G VTX
Built-in SPI Frsky/Flysky receiver
Built-in 5V 1A BEC

 Onboard 4in1 ESC  MCU Upgraded to EFM8BB21

Power Supply: 1S LiPo/LiPo HV
Current: 5A continuous, peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory Firmware: O_H_50_REV16_8.HEX
Default Protocol: DSHOT600

 Onboard Frsky SPI D8 receiver Version  SPI BUS Receiver Frsky D8 Compatible

Compatible Non EU transmitter D8 model
Channels: 8CH
Failsafe Support
No ground interference ( Transmitter and receiver 1 m from the   ground): 200m~300m

 Onboard Flysky Receiver Version  SPI BUS Receiver

Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8CH (AFHDS) or 14CH (AFHDS-2A)
Failsafe Support
No ground interference ( Transmitter and receiver 1 m from the   ground): 300m

 Onboard 5.8G 40CH 25-200mW VTX  Output Power: 25mw~200mw switchable

Frequency: 40CH
Input Voltage: 3.3-5.5V
Current Consumption: 300mA (type)
Frequency: 5.8GHz 5bands 40 channels (include Race band)
Smartaudio Ready

 Runcam Nano 3 FPV Camera Model: RunCam Nano 3

Horizontal Resolution: 800TVL
Lens :¬†2.1mm(M8)¬†FOV¬†160¬į
Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V  120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm

 Lipo Battery Capacity: 300mAh
Voltage: 3.8V
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 7.5g
Connector: PH2.0

Quantity: 2 PCS

– The lightest 1s 65mm brushless whoop
– Powerful and efficiency
– The lightest 1s AIO 5IN1 F4 flight controller
РNew Unibell EX0802 brushless motors
РVTX power switchable 25mw~200mw
 Low profile Canopy design

Additional information




There are no reviews yet.

Be the first to review “18.5g Happymodel Moblite6 65mm Whoop BNF”

Your email address will not be published. Required fields are marked *